A stochastic approach for risk analysis in vapor cloud explosion

A stochastic approach for evaluating the risk of vapor cloud explosions is proposed in this work. The proposed methodology aims to incorporate the effect of uncertainty into the risk analysis to produce a better overall view for the risk. Some stochastic variables are used to estimate the probability of vapor cloud explosions: frequency of the release, the probability of not having an immediate ignition, the probability of delayed ignition and the probability of a vapor cloud explosion given a delayed ignition, as well as different possible meteorological conditions. These stochastic variables are represented with probability distribution curves. Different curves for the frequencies of releases from process equipment types (steel process pipes, flanges, manual valves, actuated valves, etc.), different equipment diameters and different leak sizes are also used in this analysis. Monte Carlo simulation is performed to obtain the risk as a probability distribution using the Analytic Solver Platform. Then the risk distribution curve obtained by Monte Carlo simulation is used to estimate the probability of satisfying the risk tolerance criterion.     

Safety assessment of the film boiling chemical vapor infiltration (FB-CVI) process through a system-theoretic accident model and process (STAMP)

Film boiling chemical vapor infiltration (FB-CVI) is considered as one of the fastest process methodologies for manufacturing carbon-carbon (C–C) composite products and possesses various advantages compared to conventional methodologies. However, there are safety concerns associated with this process for large-scale manufacturing, mainly owing to the intrinsic nature of the precursor and the process conditions. Considering the multifunctional interactions of the various systems during the process, a system-theoretic process analysis (STPA)/system theoretic accident model and process (STAMP) model is used to perform a safety analysis of the hazardous states of the FB-CVI process at the system level. As a case study, the FB-CVI process equipment employed for the manufacturing of C–C composites is considered. The safety constraints present in the system are assessed for adequacy through a hazard analysis by STPA/STAMP. The analysis through STPA/STAMP demonstrated the capability to create proactive strategies for the design and realization of process equipment that can be employed to manufacture C–C composite products through the FB-CVI process.     

Studies on polycyclic aromatic hydrocarbons in two sediment cores from the huaxi reservoir,china: Assessment of levels,sources, and ecological risk

This study investigated the levels, sources and ecological risks of 16 polycyclic aromatic hydrocarbons (PAHs) in two sediment cores that were collected along the Huaxi Reservoir. The spatial distributions and residue levels of the 16 priority PAHs in the sediments from the Huaxi Reservoir were analyzed for their potential ecological risk, source apportionment and contribution to the total PAH residue. The concentration level of the total PAHs (TPAHs) was in the range 1805 ng·g^?1 to 20023 ng·g^?1 based on dry weight, and the content of PAHs in the Huaxi Reservoir exhibited a gradual upward trend. The PAH congener ratios fluoranthene/(fluoranthene + pyrene) and indeno[1, 2, 3-cd]pyrene/(indeno[1, 2, 3-cd]pyrene + benzo[g, h, i]perylene) were used to identify the source. The main source of the low molecular weight PAHs was wood and coal combustion, whereas the high molecular weight PAHs were primarily from petroleum combustion sources. The results of an ecological risk assessment demonstrated that ACE poses a potential ecological risk, while FLU, NAP, ANT, BaP, DBA, PHEN and PYR can have serious ecological risks.     

Importance of public information and perception for managing recreational activities in the Peel-Harvey estuary, Western Australia

Surveys of water recreational activities were conducted in the Peel-Harvey estuary. Channels used by recreationists to gain information about water quality, the perception of water quality and resulting behaviour were investigated. This study showed that personal perception, local knowledge and history, absence of warnings and residency were major factors contributing to risk perception and behaviour in this recreational community. Management strategies should take this information into account to achieve maximal outcomes.     

Improvements on Flood Alleviation in Germany: Lessons Learned from the Elbe Flood in August 2002

The increase in damage due to natural disasters is directly related to the number of people who live and work in hazardous areas and continuously accumulate assets. Therefore, land use planning authorities have to manage effectively the establishment and development of settlements in flood-prone areas in order to avoid the further increase of vulnerable assets. Germany faced major destruction during the flood in August 2002 in the Elbe and Danube catchments, and many changes have been suggested in the existing German water and planning regulations. This article presents some findings of a “Lessons Learned” study that was carried out in the aftermath of the flood and discusses the following topics: 1) the establishment of comprehensive hazard maps and flood protection concepts, 2) the harmonization of regulations of flood protection at the federal level, 3) the communication of the flood hazard and awareness strategies, and 4) how damage potential can be minimized through measures of area precaution such as resettlement and risk-adapted land use. Although attempts towards a coordinated and harmonized creation of flood hazard maps and concepts have been made, there is still no uniform strategy at all planning levels and for all states (Lae nder) of the Federal Republic of Germany. The development and communication of possible mitigation strategies for “unthinkable extreme events” beyond the common safety level of a 100-year flood are needed. In order to establish a sustainable and integrated flood risk management, interdisciplinary and catchment-based approaches are needed.     

岷江上游崩塌滑坡分布规律研究

岷江为长江—级支流，上游长３３０ｋｍ，自１９８６年以来，发生崩塌滑坡２００余处，体积约２．１亿ｍ￣３。作者研究了岷江上游崩塌滑坡的分布规律。采用统计指标法，将岷江上游分为三种不同的崩塌滑坡分布密度区：①ＵＸＳ．高密度区；②ＭＸＳ，中密度区；③ＬＸＳ＿３低密度区。     

三峡库区中低产土壤重金属含量及其与小麦吸收的关系

三峡库区中低产土壤的Hg,As,Cr,Pb,Cu五个重金属含量（除渝北区外），均在国家土壤环境质量标准内，属自然背景值一级标准。Cd和Zn高于全国土壤中的平均含量和背景值含量，属二级标准。土壤的重金属含量与土壤母质类型，pH值，阳离子交换量，有机质，无定形铁和物理性粘粒有关，同时存在一定的地域分布。重庆近郊的土壤所有重金属含量相对较高。土壤重金属的可给态或有效性含量极低，锌和铜不是过量，而是不足。小麦籽粒中As,Cr,Pb,Zn,Cu含量低于国家食品对重金属限量标准和小麦籽粒背景值标准，Hg,Cd含量高于国家规定标准。籽粒中的Cu,Zn含量是小麦茎叶中的2.0-2.2倍，而茎叶中的Hg,Pb,As,Cr,Cd含量明显高于籽粒。     

浮桥河水库浮游植物的多样性及其演变

1997年4月至1998年1月对浮桥河水库浮游植物状况进行了调查,结果表明:该水库常见浮游植物约189种,隶属于8门92属,其中硅藻门25属64种,绿藻门39属79种,蓝藻门17属30种,甲藻门、隐藻门、裸藻门、黄藻门及金藻门种类较少。其个体密度年平均为44.9×104ind/L;生物量年平均为6.439mg/L,其中蓝藻占33.37%,硅藻和绿藻分别占20.68%和20.16%,甲藻占16.31%。浮游植物现存量的季节变化表现为从春季开始平稳上升,至秋季达到最大值。蓝藻、硅藻、绿藻等主要种类的季节变化按生物量大小依次为:秋季夏季春季冬季。浮游植物现存量的水平分布为上游最高,中游次之,下游最低,库汊低于中游而略高于下游。群落的相似性表现为上、中游相近,下游和库汊相近。群落的物种多样性根据计算Shannon-Weiner指数为上游最大,其次为中游,下游再次,库汊最低。与1980年的调查结果相比较,浮桥河水库浮游植物种类小型化明显,生物量增加2.5倍。     

Vulnerability assessment of sea-level rise in Viti Levu, Fiji Islands

Fiji is expected to come under increasing pressure and risk from various threats resulting from climate change and sea-level rise (SLR). Fiji consists of 332 islands and thus has a predominant and large coastline. Viti Levu is the largest and most important of the islands, harboring Fiji’s capital city and most of the major towns concentrated around its coast. The objectives of this study were to evaluate the extent of possible sea-level rise using GIS, and to identify high-risk locations. Potential sea level rise was shown graphically as an output to determine where inundation or flooding would take place. This analysis allowed important areas facing risk to be highlighted for future action. Flooding/inundation can be classified into two kinds: ‘permanent inundation’, which is the result of sea-level rise with tide; and ‘temporary flooding’, also including occasional storm surge events. The inundated area was displayed under different projections and quantified. The results produced output maps showing the distribution of inundation/flooding around the island of Viti Levu as well as the extent of flooding. Six scenarios for sea-level rise were used (0.09, 0.18, 0.48, 0.50, 0.59, 0.88 m). Six scenarios for storm surge were used with return intervals of 1, 2, 5, 10, 25, 50 years. High risk and priority locations are identified as Fiji’s capital Suva, the major tourist center and arrival port of Nadi, and Fiji’s second city Lautoka. Future action, adaptation and response strategies in these identified locations must occur to reduce risk from climate change.     

A Procedure for NEPA Assessment of Selenium Hazards Associated With Mining

This paper gives step-by-step instructions for assessing aquatic selenium hazards associated with mining. The procedure was developed to provide the U.S. Forest Service with a proactive capability for determining the risk of selenium pollution when it reviews mine permit applications in accordance with the National Environmental Policy Act (NEPA). The procedural framework is constructed in a decision-tree format in order to guide users through the various steps, provide a logical sequence for completing individual tasks, and identify key decision points. There are five major components designed to gather information on operational parameters of the proposed mine as well as key aspects of the physical, chemical, and biological environment surrounding it — geological assessment, mine operation assessment, hydrological assessment, biological assessment, and hazard assessment. Validation tests conducted at three mines where selenium pollution has occurred confirmed that the procedure will accurately predict ecological risks. In each case, it correctly identified and quantified selenium hazard, and indicated the steps needed to reduce this hazard to an acceptable level. By utilizing the procedure, NEPA workers can be confident in their ability to understand the risk of aquatic selenium pollution and take appropriate action. Although the procedure was developed for the Forest Service it should also be useful to other federal land management agencies that conduct NEPA assessments, as well as regulatory agencies responsible for issuing coal mining permits under the authority of the Surface Mining Control and Reclamation Act (SMCRA) and associated Section 401 water quality certification under the Clean Water Act. Mining companies will also benefit from the application of this procedure because priority selenium sources can be identified in relation to specific mine operating parameters. The procedure will reveal the point(s) at which there is a need to modify operating conditions to meet environmental quality goals. By recognizing concerns early in the NEPA process, it may be possible for a mining company to match operational parameters with environmental requirements, thereby increasing the likelihood that the permit application will be approved.